• Panel Design is Modular and Modular design helps to enhance Reliability.
• Fully Bolted Design gives ease of assembly. Compartmentalization provides quick installation and fast delivery.
• Modular design features leads to optimum space utilization. Less space required to manage inventory of enclosure structure. Flexibility to be assembled to give multiple versions- fixed.
• Form 1 to Form 4 to type 7 possible. Separate Bus bar chambers and Cable alley so Safety risks are reduced.
• Future Extension at site possible.

TEST QUALIFIED AS PER LATEST EDITION OF IEC 61439 - 2020 STANDARDS PART I & II

• Degree of protection of enclosures
• Mechanical operation
• Mechanical impact test (IK)
• Lifting
• Marking
• Resistance to corrosion
• Glow wire test
• Resistance of insulating material to heat
• Separation of form.
• Impulse withstand voltage
• Temperature rise limits
• Short-circuit withstand strength
• Power frequency withstand voltage

PARAMETER

• Short Time Withstand Icw – 50kA / 65kA.
• Rated voltage -415V.
• Rated frequency – 50Hz
• Rated Insulation voltage – 790V
• Impulse withstand voltage – 12kV.
• Pollution degree - 3.
• Degree of protection – IP43
• Bus bar – Aluminum
• Form of Construction – 4B

SWITCHGEAR

INCOMER

• ACB up to 4000A
• Rated current (In) : 4000 Amp
• Declare current:4000Amps
• Rated voltage (Ue):690 V
• Rated insulation voltage (Ui):1000V
• Rated impulse voltage (Uimp):12KV

OUTGOINGS

• Rated current (In) : 2500 A
• Rated current (In) : 630 A
• Rated current (In) : 400A
• Rated current (In) : 250A

• Short circuit withstand Icw :- 50kA and 65kA
•  
• Power frequency withstand voltage :- Main circuit 750V.
•  
• Impulse withstand voltage :- Main circuit 12kV.
•  
• Temperature rise :-Tested (4000 amp) and found within limits as per Table 6 IEC -61439-1&2-2020
•  
• Mechanical Operations :- Tested for 200Nos of operations for ACB/MCCB Door opening and closing No abnormal efforts required to operate and no operating conditions impaired.
•  
• Pollution Degree - 3 :- Suitable to operate in Conductive and Nonconductive pollution that becomes conductive due to condensation

24hr damp heat cycle / 24hr salt mist cycle

• No evidence of iron oxide and cracking
• Door , Hinges, fasteners no abnormal effort

7days in Heat Chamber at 70o C , 4days at ambient temp

• No cracks .
• No evidence of grease or sticky surface
• Pressure of 5N with cloth wrapped no traces of cloth on surface

• 1) Verification of Thermal stability of insulating materials.
• 2) Verification of Resistance of insulating materials to abnormal heat & fire.

960o C for Conducting Parts ,
650o C for other parts
• No visible flame , No sustained glowing.

10 J of Impact energy applied And Including Repeat IP 43 test.

• IP4X - Protection against ingress of wire greater than 1mm to hazardous part
• IPX3 - Protection against ingress of spraying water
• IP5X - Protection against ingress of wire greater than 1mm to hazardous part
• IPX4 - Protection against ingress of splashing water
• IP2X - Protection is provided even in case of open door
• to avoid accidental contact with live parts

• Power frequency withstand voltage :- Main circuit 750V.
• Impulse withstand voltage :- Main circuit 12kV.
• Pollution degree - 3.
• Dielectric properties
• Clearances and Creepage Distances

• Short circuit withstand Test Main circuit – 65 ka 1 sec
• Short circuit withstand Test O/G ACB circuit – 50 ka 1 sec
• Short circuit withstand Test O/G MCCB circuit – 36 ka 1 sec
• High voltage power frequency – 2.5 Vrms for 1 minute

• Safer Bus bar
  Bus bars have higher clearances than those prescribed by global switchboard offering a superior level of safety.
• Zero Stray Voltage
  Presence of earth contact on every door and Earthing Bus bar running through the length of the Panel and connected to structural members
• Best in Class Insulation
  Equipped with Polyester glass support for Bus bar Insulation.
• No Accidental touch
  Rotary knob ensures that no accidental touch with live part during maintenance